BetterSPICE 0.8.0 · User manual
User manual
Everything the app does, how to learn it and how to get a job done: 58 chapters in eight parts, a task index, a glossary and an index. Press / to search it.
How do I…
More jobs, in your own words: the task index. Words with a set meaning: the glossary. Everything else: the index.
Contents
ILearn
Install, a guided first circuit in two parts, a vendor model, a part of your own, and how BetterSPICE thinks. Read it in order once.
- 01Install and startHow-to
- 02Tutorial 1: Draw an RC filter and watch it runTutorial
- 03Tutorial 2: Measure it exactlyTutorial
- 04Tutorial 3: A regulator with a vendor modelTutorial
- 05Tutorial 4: Make a part with the Part WizardTutorial
- 06How BetterSPICE thinksExplanation
- 07A tour of the windowExplanation
- 08The guided toursExplanation
IIHow do I…?
One page per job, titled by the goal. Each says what you need first, gives the steps, what you should see, what to do if it doesn't work, and where to read more.
IIIFix a problem
Something stopped, reads 0 V or looks wrong. Find what you see on the screen, then the cause and the fix. Every diagnostic code is here too.
IVQuick reference
The one-sheet card, every keyboard shortcut grouped by task, and a glossary of the words this manual uses.
VThe app in detail
Every window, menu, pane, tool and analysis field, in the order they appear on screen.
- 19The window in detailReference
- 20Menus and the command paletteReference
- 21Drawing and editingReference
- 22Hierarchical sheets and busesReference
- 23The library and model searchReference
- 24The inspector, values and slidersReference
- 25Live simulationReference
- 26Probes, scopes and the dockReference
- 27Simulate (F5) and its enginesReference
- 28Analyses and their setup fieldsReference
- 29The Analysis viewReference
VIParts and models
Every device with every parameter, its unit, default, range and where its value comes from. Digital logic, control blocks, transmission lines, the model catalogue, the model dialog, the Part Wizard and the symbol editor.
- 30Devices: passivesReference
- 31Devices: sourcesReference
- 32Devices: semiconductorsReference
- 33Devices: amplifiers, power blocks and ICsReference
- 34Devices: relays, switches, motors and audioReference
- 35Devices: sensors, optoelectronics and displaysReference
- 36Devices: power ICs, drivers and protectionReference
- 37Devices: batteries, board parts and analog blocksReference
- 38Devices: interface chips, switches and microcontrollersReference
- 39Digital logicReference
- 40Programmable control blocksReference
- 41Programming the MCUReference
- 42Transmission lines, PCB traces and cablesReference
- 43The model catalogueReference
- 44The model dialogReference
- 45Part WizardReference
- 46Symbol editor and My partsReference
- 47CalculatorsReference
VIIFiles and integration
The circuit, part and symbol file formats, importing KiCad and EasyEDA Pro, exporting pictures, netlists and reports, AI agents, and the bspice command line.
VIIILists and data
Example circuits worth opening first, every Part Wizard template field, environment variables, install details and how the engine is verified.